Edge-Core ECS3510-28T Management Manual page 761

E
XAMPLE
Console(config)#clock timezone Japan hours 8 minute 0 after-UTC
Console(config)#
R
ELATED
show sntp (752)
This command sets the system clock. It may be used if there is no time
calendar set
server on your network, or if you have not configured the switch to receive
signals from a time server.
S
YNTAX
calendar set hour min sec {day month year | month day year}
D
EFAULT
None
C
OMMAND
Privileged Exec
C
OMMAND
Note that when SNTP is enabled, the system clock cannot be manually
configured.
E
XAMPLE
This example shows how to set the system clock to 15:12:34, February
1st, 2011.
Console#calendar set 15:12:34 1 February 2011
Console#
This command displays the system clock.
show calendar
D
EFAULT
None
C
OMMANDS
hour - Hour in 24-hour format. (Range: 0 - 23)
min - Minute. (Range: 0 - 59)
sec - Second. (Range: 0 - 59)
day - Day of month. (Range: 1 - 31)
month - january | february | march | april | may | june | july |
august | september | october | november | december
year - Year (4-digit). (Range: 1970 - 2037)
S
ETTING
M
ODE
U
SAGE
S
ETTING
– 761 –
| System Management Commands
C 20
HAPTER
Time