Changing The Aging Time - Edge-Core ECS3510-28T Management Manual

| Address Table Settings
C 7
HAPTER

Changing the Aging Time

C A
HANGING THE GING
Click Apply.
4.
Figure 94: Configuring Static MAC Addresses
To show the static addresses in MAC address table:
Click MAC Address, Static.
1.
Select Show from the Action list.
2.
Figure 95: Displaying Static MAC Addresses
T
IME
Use the MAC Address > Dynamic (Configure Aging) page to set the aging
time for entries in the dynamic address table. The aging time is used to
age out dynamically learned forwarding information.
CLI R
EFERENCES
◆ "mac-address-table aging-time" on page 1051
P
ARAMETERS
These parameters are displayed:
Aging Status – Enables/disables the function.
◆
Aging Time – The time after which a learned entry is discarded.
◆
(Range: 10-844 seconds; Default: 300 seconds)
– 230 –