This command shows the QoS mapping mode.
show qos map
trust-mode
S
YNTAX
show qos map trust-mode interface interface
C
OMMAND
Privileged Exec
E
XAMPLE
The following shows that the trust mode is set to CoS:
Console#show qos map trust-mode interface ethernet 1/5
Information of Eth 1/5
CoS Map Mode:
Console#
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
M
ODE
CoS mode
– 1171 –
| Class of Service Commands
C
36
HAPTER
Priority Commands (Layer 3 and 4)