Show Privilege - Edge-Core ECS3510-28T Management Manual

This command assigns a privilege level to specified command groups or
privilege
individual commands. Use the no form to restore the default setting.
S
YNTAX
privilege mode [all] level level command
no privilege mode [all] command
D
EFAULT
Privilege level 0 provides access to a limited number of the commands
which display the current status of the switch, as well as several database
clear and reset functions. Level 8 provides access to all display status and
configuration commands, except for those controlling various
authentication and security features. Level 15 provides full access to all
commands.
C
OMMAND
Global Configuration
E
XAMPLE
This example sets the privilege level for the ping command to Privileged
Exec.
Console(config)#privilege exec level 15 ping
Console(config)#
This command shows the privilege level for the current user, or the

show privilege

privilege level for commands modified by the
S
YNTAX
show privilege [command]
C
OMMAND
Privileged Exec
mode - The configuration mode containing the specified command.
(See "Understanding Command Modes" on page 682
"Configuration Commands" on page
all - Modifies the privilege level for all subcommands under the
specified command.
level level - Specifies the privilege level for the specified command.
Refer to the default settings described for the access level
parameter under the username
command - Specifies any command contained within the specified
mode.
S
ETTING
M
ODE
command - Displays the privilege level for all commands modified
by the privilege command.
M
ODE
– 805 –
| Authentication Commands
C 23
HAPTER
User Accounts and Privilege Levels
683.)
command. (Range: 0-15)
privilege command.
and