Command Line Processing; Table 42: Configuration Command Modes; Table 43: Keystroke Commands - Edge-Core ECS3510-28T Management Manual

Edge-core 28/52-port fast ethernet layer 2 switch
Table of Contents

Advertisement

To enter the other modes, at the configuration prompt type one of the
following commands. Use the exit or end command to return to the
Privileged Exec mode.

Table 42: Configuration Command Modes

Mode
Access
Control List
CFM
Class Map
ERPS
Interface
Line
MSTP
Policy Map
Time Range
VLAN
For example, you can use the following commands to enter interface
configuration mode, and then return to Privileged Exec mode
Console(config)#interface ethernet 1/5
.
.
.
Console(config-if)#exit
Console(config)#
Commands are not case sensitive. You can abbreviate commands and
C
L
OMMAND
INE
parameters as long as they contain enough letters to differentiate them
P
ROCESSING
from any other currently available commands or parameters. You can use
the Tab key to complete partial commands, or enter a partial command
followed by the "?" character to display a list of possible matches. You can
also use the following editing keystrokes for command-line processing:

Table 43: Keystroke Commands

Keystroke
Ctrl-A
Ctrl-B
Ctrl-C
Ctrl-E
Ctrl-F
C
HAPTER
Command
access-list arp
access-list ip standard
access-list ip extended
access-list ipv6 standard
access-list ipv6 extended
access-list mac
ethernet cfm domain
class-map
erps domain
interface {ethernet port |
port-channel id| vlan id}
line {console | vty}
spanning-tree mst-configuration
policy-map
time-range
vlan database
Function
Shifts cursor to start of command line.
Shifts cursor to the left one character.
Terminates the current task and displays the command prompt.
Shifts cursor to end of command line.
Shifts cursor to the right one character.
– 685 –
| Using the Command Line Interface
18
Entering Commands
Prompt
Console(config-arp-acl)
Console(config-std-acl)
Console(config-ext-acl)
Console(config-std-ipv6-acl)
Console(config-ext-ipv6-acl)
Console(config-mac-acl)
Console(config-ether-cfm)
Console(config-cmap)
Console(config-erps)
Console(config-if)
Console(config-line)
Console(config-mstp)
Console(config-pmap)
Console(config-time-range)
Console(config-vlan)
Page
962
944
944
950
950
956
1317
1174
1087
968
728
1064
1177
762
1123

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecs3510-52t

Table of Contents