Edge-Core ECS3510-28T Management Manual page 756

| System Management Commands
C 20
HAPTER
Time
show ntp
Manual Configuration Commands
clock summer-time
(date)
This command displays the current time and configuration settings for the
NTP client, and indicates whether or not the local time has been properly
updated.
C M
OMMAND ODE
Normal Exec, Privileged Exec
C U
OMMAND SAGE
This command displays the current time, the poll interval used for sending
time synchronization requests, and the current NTP mode (i.e., unicast).
E
XAMPLE
Console#show ntp
Current Time
Polling
Current Mode
NTP Status
NTP Authenticate Status
Last Update NTP Server
Last Update Time
NTP Server 192.168.3.20 version 3
NTP Server 192.168.3.21 version 3
NTP Server 192.168.4.22 version 3 key 19
NTP Authentication Key 19 md5 42V68751663T6K11P2J307210R885
Console#
This command sets the start, end, and offset times of summer time
(daylight savings time) for the switch on a one-time basis. Use the no form
to disable summer time.
S
YNTAX
clock summer-time name date b-date b-month b-year b-hour
b-minute e-date e-month e-year e-hour e-minute [offset]
no clock summer-time
name - Name of the time zone while summer time is in effect,
usually an acronym. (Range: 1-30 characters)
b-date - Day of the month when summer time will begin.
(Range: 1-31)
b-month - The month when summer time will begin.
(Options: january | february | march | april | may | june | july
| august | september | october | november | december)
b-year- The year summer time will begin.
b-hour - The hour summer time will begin. (Range: 0-23 hours)
b-minute - The minute summer time will begin. (Range: 0-59
minutes)
– 756 –
: Apr 29 13:57:32 2011
: 1024 seconds
: unicast
: Disabled
: Enabled
: 0.0.0.0 Port: 0
: Jan 1 00:00:00 1970 UTC