Edge-Core ECS3510-28T Management Manual page 228

| Address Table Settings
C 7
HAPTER
Configuring MAC Address Learning
Also note that MAC address learning cannot be disabled if any of the
◆
following conditions exist:
802.1X Port Authentication has been globally enabled on the switch
■
(see "Configuring 802.1X Global Settings" on page
Security Status (see
■
enabled on the same interface.
P
ARAMETERS
These parameters are displayed:
Interface – Displays a list of ports or trunks.
◆
Port – Port Identifier. (Range: 1-28/52)
◆
◆ Trunk – Trunk Identifier. (Range: 1-16)
Status – The status of MAC address learning. (Default: Enabled)
◆
W I
EB NTERFACE
To enable or disable MAC address learning:
Click MAC Address, Learning Status.
1.
Set the learning status for any interface.
2.
Click Apply.
3.
Figure 93: Configuring MAC Address Learning
– 228 –
"Configuring Port Security" on page
385).
381) is