Show Qos Map Dscp-Mutation - Edge-Core ECS3510-28T Management Manual

E
XAMPLE
This example sets the QoS priority mapping mode to use DSCP based on
the conditions described in the Command Usage section.
Console(config)#interface ge1/1
Console(config-if)#qos map trust-mode dscp
Console(config-if)#
This command shows ingress CoS/CFI to internal DSCP map.
show qos map
cos-dscp
S
YNTAX
show qos map cos-dscp interface interface
C
OMMAND
Privileged Exec
E
XAMPLE
Console#show qos map cos-dscp interface ethernet 1/5
CoS Information of Eth 1/5
CoS-DSCP map.(x,y),x: PHB,y: drop precedence:
CoS
---------------------------------
0
1
2
3
4
5
6
7
Console#
This command shows the ingress DSCP to internal DSCP map.
show qos map
dscp-mutation
S
YNTAX
show qos map dscp-mutation interface interface
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
M
ODE
: CFI 0 1
(0,0) (0,0)
(1,0) (1,0)
(2,0) (2,0)
(3,0) (3,0)
(4,0) (4,0)
(5,0) (5,0)
(6,0) (6,0)
(7,0) (7,0)
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
– 1169 –
| Class of Service Commands
C 36
HAPTER
Priority Commands (Layer 3 and 4)