Edge-Core ECS3510-28T Management Manual page 475

Use the Administration > RMON (Configure Global - Add - Event) page to
C
ONFIGURING
set the action to take when an alarm is triggered. The response can include
RMON E
VENTS
logging the alarm or sending a message to a trap manager. Alarms and
corresponding events provide a way of immediately responding to critical
network problems.
CLI R
"Remote Monitoring Commands" on page 793
◆
C
OMMAND
If an alarm is already defined for an index, the entry must be deleted
◆
before any changes can be made.
One default event is configured as follows:
◆
event Index = 1
P
ARAMETERS
These parameters are displayed:
Index – Index to this entry. (Range: 1-65535)
◆
Type – Specifies the type of event to initiate:
◆
■
■
■
■
Community – A password-like community string sent with the trap
◆
operation to SNMP v1 and v2c hosts.
Although the community string can be set on this configuration page, it
is recommended that it be defined on the SNMP trap configuration page
(see
configuring it here. (Range: 1-127 characters)
Description – A comment that describes this event. (Range: 1-127
◆
characters)
Owner – Name of the person who created this entry. (Range: 1-127
◆
characters)
EFERENCES
U
SAGE
Description: RMON_TRAP_LOG
Event type: log & trap
Event community name is public
Owner is RMON_SNMP
None – No event is generated.
Log – Generates an RMON log entry when the event is triggered.
Log messages are processed based on the current configuration
settings for event logging (see
page 418).
Trap – Sends a trap message to all configured trap managers (see
"Specifying Trap Managers" on page
Log and Trap – Logs the event and sends a trap message.
"Setting Community Access Strings" on page
– 475 –
| Basic Administration Protocols
C 14
HAPTER
"System Log Configuration" on
463).
457) prior to
Remote Monitoring