Ddns Setting; Dns Proxy Setting - Planet Networking & Communication MH-5001 User Manual

MH-5001 User Manual

4.4.2 DDNS setting

Step 1. Setup DDNS
If the IP address of MH-5001 WAN port is
dynamic allocated, you may want to have the
Dynamic DNS mechanism to make your partner
always use the same domain name (like xxx.com)
to connect to you. Select a WAN interface to
update the DDNS record. Here we supply three
DDNS Service Providers. Fill in the Host
Name, Username, Password supplied by the
DDNS web site. Please refer to the DDNS web
site for the detailed information. Click Apply to
activate the settings.
Before setting the DDNS information in this page.
Make sure that you have registered an account in
the indicated Service Provider. Then you can
enter the related information in the DDNS page.
FIELD
Enable DDNS for WAN1
Interface
Service Provide
Hostname
Username
Password
Oray Server
Port

4.4.3 DNS Proxy setting

Step 1. Setup DNS Proxy
Check the Enable DNS Proxy and click the
Apply to store the settings. From now on, your
LAN/DMZ PCs can use MH-5001 as their DNS
server, as long as the DNS server for MH-5001
has been set in its WAN settings.
SYSTEM TOOLS > Admin Settings > DDNS
Enable DDNS feature of MH-5001
Assign which public IP address of interface to the DDNS server.
The domain address of DDNS server. In the MH-5001, we provide some
websites for your choice.
If you choose WWW.ORAY.NET as DDNS service provider. It would
register the source IP address which is connected to the DDNS server. It
means that the WAN1 IP address must be public address.
The registered Hostname in the DDNS server.
The registered username in the DDNS server.
The registered password in the DDNS server.
The server which users can access its resources.
The default port number to connect to WWW.ORAY.NET for free
charge.
Table 4-5 System Tools – DDNS setting page
SYSTEM TOOLS > Admin Settings > DNS Proxy
DESCRIPTION
45
Chapter 4
System Tools
EXAMPLE
Enabled
WAN1
WWW.ORAY.NET
Test1500.vicp.net
Test1500
Wall500
ns1.oray.net
5050