enAble40 wheelchair control – installation and programming
8 enAble40 wheelchair control – installation and programming
8.1 Overview
With the enAble40 control unit, the power wheelchair B500 (classic) can indicate the causes
of error messages on the display.
Error sources in the drive section and in the electric options are indicated by flashing of the
corresponding sections in the display's pictograph.
The hand programming device can be used to make parameter changes.
Fig. 46
Components of the enAble40 wheelchair control
1 Attendant control
2 Hand control device
3 Controller
8.2 Installation and Wiring
Fig. 47
Dimensions of the enAble40 wheelchair control
46 | Ottobock
Skippi