Cleaning In A Washing Chamber/Wheelchair Washing System; Cleaning The Seat Cushion; Cleaning Belts/Straps - Otto Bock Centro S1 Instructions For Use Manual

Table of Contents

Advertisement

9.16.1.2 Cleaning in a washing chamber/wheelchair washing system

1) Remove the seat cushion and upholstery, and follow the washing instructions for each article.
2) Verify the firm fit of the caster head cover.
NOTICE! The caster head cover must fit firmly so that no grease can be washed out of the ball bear­
ings or displaced by compressed air. Otherwise damage to the bearing would result.
3) Wash the wheelchair at max. 60 °C (140 °F) for max. 10 minutes.
4) If necessary: Remove all components in which water has accumulated.
5) Allow the wheelchair to dry on all four wheels. Tilt the wheelchair slightly forward during this time so that water
can drain from the frame.
INFORMATION: We recommend drying with compressed air.
6) If necessary: Reinstall all components that were removed.
7) Before storing or using the wheelchair again, verify that it is dry. Wipe wet components with a cloth as needed.
8) Ensure that all labels (nameplate and warnings) are still legible. Otherwise replace these labels.
Important information on cleaning
Do not use any aggressive cleaners, solvents or hard brushes etc.
The seat and back upholstery is machine washable at max. 60 °C (140 °F).
For more information on cleaning seat cushions, see the care instructions on the product or the supplied
instructions for use.

9.16.1.3 Cleaning the seat cushion

Standard seat cushion
► Clean the seat cushion according to the attached care label.
Seat cushion with foam core
1) Open the zipper and remove the foam core (see fig. 37).
2) Clean the cover according to the attached care label.
3) Wash all foam parts by hand at 40°C using a mild, environmentally friendly detergent. Allow to air dry.
4) Reinsert the foam core with proper alignment. Close the zipper.
37
Important information on cleaning
For more information on cleaning seat cushions, see the care instructions on the product or the supplied
instructions for use.

9.16.1.4 Cleaning belts/straps

Cleaning a belt system with metal closure
INFORMATION
Observe the washing recommendations on the product and the information in the corresponding instructions for
use provided for the product.
Centro S1
Use
29

Advertisement

Table of Contents
loading

Table of Contents