Table of Contents
Advertisement
6.12 Installing and adjusting the head support
CAUTION
Incorrect settings
Hitting components due to violent head movements of the user
► Do not position yourself behind the head support during adjustment, but at its side.
Installing the mounting kit
1) Adjust both push handles so they are parallel and at the same height (not illustrated).
2) Install the mounting kit to hold the head support on the push handles using the clamping jaws and star handles
(see fig. 29, item 1).
Installation is described in more detail in the supplied instructions for use – reference number 647G367.
Attaching the head support
1) Open the clamp bracket on the mounting kit (see fig. 29, item 2).
2) Insert the adjustment tube of the head support into the clamp bracket (see fig. 29, item 3).
Adjusting the head support
1) Height adjustment: Loosen the clamping lever and adjust the head support height (see fig. 30, item 1).
2) Sideways adjustment: Loosen the mounting screws on the clamping plate and adjust the head support side
ways (see fig. 30, item 2).
3) Depth adjustment: Loosen the clamping lever and adjust the head support depth (see fig. 30, item 3).
4) Angle adjustment: Loosen the mounting screws on the head support and adjust the angle (see fig. 30,
item 4).
5) Once all settings have been adjusted, firmly close the clamping lever and tighten the mounting screws.
6) Position the stop on the adjustment tube and tighten (see fig. 29, item 4).
29
6.13 Adjusting the tray
The tray slides onto the arm supports.
If the tray holder was not adapted to the arm support height, this can be done with the help of the enclosed instruc
tions for use or assembly instructions.
7 Delivery
7.1 Final inspection
A final check must be carried out before the wheelchair can be handed over:
•
Are all options installed according to the order form?
•
Are the drive wheels correctly positioned?
•
Do the quick-release axles rotate freely and lock securely?
For pneumatic tyres: Is the tyre pressure correct (see tyre sidewall for information)?
•
•
Only after adjustment: Have the brakes (wheel locks) been adjusted correctly?
•
Only after adjustments: Has the respective caster journal angle been adjusted vertically?
•
Only after adjustments: Has the anti-tipper been adjusted correctly?
Avantgarde Teen2 T,
Avantgarde Teen2 VR
30
Delivery
21
Advertisement
Table of Contents
