Installing And Adjusting The Swivel Unit And Forearm Supports - Otto Bock Motus CV Instructions For Use Manual

Settings
63
Side panel with arm pad short, side panel with arm pad long "depth-adjustable"
1) Height adjustment of the forearm support: Pull the release lever in the round opening of the side panel
upwards and adjust the height (see fig. 65, item 1).
2) Depth adjustment of the forearm support: Press the release button in the forearm support and adjust the
depth (see fig. 66, item 1).
3) Removing the side panel: Pull the side panel release lever back (see fig. 67, item 1) and fold the side panel
up by about 90° (see fig. 67, item 2). Turn the side panel towards the back support (see fig. 68, item 1) and
pull it out of the side panel adapter (see fig. 68, item 2).
65
67

6.8.1 Installing and adjusting the swivel unit and forearm supports

The swivel unit is mounted on the side panel of the wheelchair with a tube clamp. The channel forearm pad (modu­
lar forearm support) is mounted on the moveable part of the swivel unit.
Assembly is described in more detail in the instructions for use supplied with the swivel unit – reference number
647H564.
Adjusting the swivel unit with forearm support is described in more detail in the supplied instructions for use (user).
28
64
66
68
Motus CV, Motus CS