Evaluation Change Display - Sharp IV-C35M User Manual

Setting the Operating and System Conditions

[8] Evaluation change display

Specify whether the evaluation condition change
menu can be displayed on the operation screen or
not.
2
Select the "
RUN COND" screen and select "YES" on the popup
menu.
Press the TRG/BRT key to move the cursor to the
upper function menu. Select "SCREEN" and press
the SET key. Then select "OPS-MENU."
Select "SCREEN-CHG" on the lower menu on the
operation screen, and press the SET key. "JDG-
COND CHG" will be displayed in the lower right
corner of the screen. You can display the evaluation
condition change menu by pressing the up and down
keys.
- Press the SET key. The cursor will move to the
area containing the phrase "evaluation condition
change menu during operation." You can change
the settings for the evaluation conditions.
- At this time, the screen display will look the same
as the normal operation main screen, except for the
area marked "evaluation condition change menu
shown during operation."
DISP CHG-EVAL" line on the "TYPE
TYPE RUN COND SCREEN SAVE
1MONITOR OUTPUT
CAM1
2CAPTURE IMG
PARTIAL-IMG
3MESSAGE DISPLAY
YES(NUMERIC)
4PATTERN DISPLAY
YES
5SHOW BINARY IMG
YES
6SHOW
FIX IMG YES
7OPS MAIN DISP
YES
8DISP CHG-EVAL
YES
9PC-MNTR
NO
0THROUGH DISPLAY
NO
qEXTENSION FUNC.
NO
SET=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
TYPE RUN COND SCREEN SAVE
1MONITOR OUTPUT
CAM1
2CAPTURE IMG
PARTIAL-IMG
3MESSAGE DISPLAY
YES(NUMERIC)
4PATTERN DISPLAY
YES
5SHOW BINARY IMG
YES
6SHOW
FIX IMG YES
7OPS MAIN DISP
YES
8DISP CHG-EVAL
NO
9PC-MNTR
NO
0THROUGH DISPLAY
NO
qEXTENSION FUNC.
NO
(TYPE00)
MEAS 0000ms 2001-10-14 10:38
MEASURE 0 CAM1 POSI-DEVIATION
Display evaluation condition
change menu while in operation
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
2-10
COLOR F C1 BRT
YES
NO
COLOR F C1 BRT
OPS-MENU
MAIN
SELECT
RETURN
COLOR F C1 BRT
JDG-COND-CHG
PC-MNTR
PC-MNTR 2