Sharp IV-C35M User Manual page 64

Setting Measurement Conditions
Setting procedure
A general outline of the setting procedures is shown below. For details, see each chapter.
Setting the measurement program
conditions
3
Select the image pre-processing
method
Set final numerical calculation
Set final output condition
Setting the input/output conditions
Setting the system conditions
Save the settings in the flash memory
Return to the MAIN OPS MENU
MEASURE 0
MEASURE 1
MEASURE 2
Jump to the next page
MEASURE 3
MEASURE 4
Image pre-processing - See page 3-29.
-
"FINAL NUM.CALC" See Chapter 19.
"FINAL OUTPUT COND"
-
"OBJ-TYPE I/O" See Chapter 21.
"OBJ-TYPE SYS"
"SAVE"
"OPS-MENU"
3-2
-
See Chapter 20.