Sharp IV-C35M User Manual page 172

Object Counting by Binary Conversion
Numeric calculation setting
- Press the TRG/BRT key to move the cursor to the upper function menu, and highlight "COND" using
the left and right arrow keys. Press the SET key to show the popup menu. Select "NUM-CALC" from
the popup menu.
- Select "NUM-CALC" on the menu tree.
See "Chapter 19: Numerical calculation."
Output condition setting
- Press the TRG/BRT key to move the cursor to the upper function menu, and highlight "COND" using
the left and right arrow keys. Press the SET key to display the popup menu. Select "OUT" from the
popup menu.
- Select "OUT-COND" on the menu tree.
See "Chapter 21: Setting the Input/Output Conditions."
Display the measurement results
Return to the operation screen and press the TRG/BRT key. The measurement results will be dis-
played on the screen.
9
Final evaluation result
Measuring time
Measurement
program
[K] of registration number 0
[A] "
[K] "
[A] "
[K] "
[A] "
[K] "
[A] "
in the measurement condition
[K]=NUMBER OF OBJECTS
[A]=TORAL AREA
(Number of pixels)
- Areas will not be displayed
for unspecified registration
numbers.
9-8
(TYPE00)
OK
MEAS XXXXms 2001-10-14 10:38
MEASUREMENT 1 CNT-BIN-OBJ
K0=00006 OK
0
A0=015781 OK
1
K1=00020 OK
1
A1=087620 OK
2
K2=00010 OK
2
A2=042680 OK
3
K3=
3
A3=
X0 7 Y0 7
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
COLOR F C1 BRT
V*.**
READY