How To Display Ng Images - Sharp IV-C35M User Manual

[2] How to display NG images

NG images can be displayed on the operation main screen and on the NG image display screen .
(1) Displaying NG images on the MAIN OPS menu
An NG image (the latest or any previous NG image) recorded with camera 1 can be displayed on the
monitor while conducting measurements from the operation main screen.
- This function only refreshes the NG image if another NG is captured. The screen is not refreshed
with normal image measurement results. Thus, this method is useful for an operation that has a
short cycle time and needs to process another workpiece soon after saving the NG image.
- When the measuring is stopped, NG images can also be displayed on the NG image display
screen. See page 1-22.
The setting procedures are as follows:
1. Select "CAM1&NG-IMG" from the monitor
output.
See page 1-17 to 1-18.
2. Set the monitor output to "NG-IMGS" or
"CAM1&NG-IMG."
Select " MONITOR OUTPUT" on the "TYPE
RUN COND" menu.
MONITOR OUTPUT
CAM1
NG-IMGS
CAM1&NG-IMG (HORIZ)
CAM1&NG-IMG (VERT)
TYPE RUN COND SCREEN SAVE
1MONITOR OUTPUT
2CAPTUR IMG
3MESSAGE DISPLAY
4PATTERN DISPLAY
5SHOW BINARY
6SHOW FIX IMG
7OPS MAIN DISP
8DISP CHG-EVAL
9PC-MNTR
0THROUGH DISPLAY
qEXTENSION FUNC.
Description
Display the camera 1 image on the whole screen.
Display the NG image on the whole screen.
Display the camera 1 image on upper half, and the NG image on lower half.
Display the camera 1 image on left half, and the NG image on right half.
1-19
Setting and Operating Outline
NG INGS
PARTIAL-IMG
YES(NUMERIC)
YES
YES
YES
YES
NO
NO
NO
NO
=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
1
COLOR F C1 BRT
CAM1
NG IMGS
CAM1&NG-IMG(HORIZ)
CAM1&NG-IMG(VERT)