Pc Monitor Screen; Through Display; Menu Bar - Sharp IV-C35M User Manual

[9] PC monitor screen

Specify whether to display the PC monitor
on the operation screen.
Select the " PC-MNTR" line on the
"TYPE RUN COND" screen and select
"YES" on the popup menu. Now the PC
monitor screen can be displayed.
Select "SCREEN-CHG" on the lower menu
bar of the operation screen and then select
"PC-MNTR" on the popup menu. The PC
monitor will be displayed.
1 The ON (
) or OFF (
2 The ON (
) or OFF (
3 The ON (
) or OFF (

4 Menu bar

Menu bar
Change the output relay address (Y00 to Y15) using the up and down keys (in units of
SEL-OUT
8 points).
Change the auxiliary relay address (C000 to C127) using the up and down keys (in
SEL-AUX
units of 8 points).
Change the final numerical calculation address (AN00 to AN15) using the up and down
SEL-NUM
keys (in units of 8 points).
The other data displayed is the same as on the operation screen. -See page 1-10.

[10] Through display

Select the desired measurement image status
(FREEZE or THROUGH) by choosing either "YES"
or "NO" on the operation screen.
THROUGH
DISPLAY
Measurements can be made on a
NO
frozen image.
Measurements can be made on a
YES
through image.
1
2
3
4
) status of the input relays (X00 to X07) is displayed.
) status of the output relays (Y00 to Y15) is displayed.
) status of the auxiliary relays (C000 to C127) is displayed.
Description
Description
2-11
Setting the Operating and System Conditions
(TYPE00)AREA1
MEAS ms 2001-10-14 10:38
[NUMERIC CALC] [TMR]
AN00= +00000250.0 OK TM0:200
AN01= -00000300.0 OK TM1:300
AN02=NOT SET TM2:NOT SET
AN03=NOT SET TM3:NOT SET
AN04=NOT SET TM4:NOT SET
AN05=NOT SET TM5:NOT SET
AN06=NOT SET TM6:NOTSET
AN07=NOT SET TM7:NOT SET
MMU-CHG MAIN-COND SEL-OUT SEL-AUX SEL-NUM SCREEN-CHG CHG-TYPE
TYPE RUN COND SCREEN SAVE
1MONITOR OUTPUT
CAM1
2CAPTURE IMG
PARTIAL-IMG
3MESSAGE DISPLAY
YES(NUMERIC)
4PATTERN DISPLAY
YES
5SHOW BINARY IMG
YES
6SHOW
FIX IMG YES
7OPS MAIN DISP
YES
8DISP CHG-EVAL
NO
9PC-MNTR
NO
0THROUGH DISPLAY
YES
qEXTENSION FUNC.
NO
SET=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
COLOR T C1 DRK
*.**
[CNTR]
CN0:100
CN1:150
CN2:NOT SET
CN3:NOT SET
CN4:NOT SET
CN5:NOT SET
CN6:NOT SET
CN7:NOT SET
COLOR F C1 BRT
YES
NO
2