Copying - Sharp IV-C35M User Manual

[3] Copying

When there are many common parameters between object types, it is most efficient to access those
existing sets of parameters in order to copy and then modify them.
The parameters of a previously specified object type are copied into another object type, after which they
can be modified.
The source of the copy
The measurement conditions of
the source object type. (The data
is copied from flash memory)
Operation procedure
On the "MAIN MENU" screen, select "OBJECT
TYPE COND" and then "TYPE00" (current type). At
this point, press the TRG/BRT key to display the
popup menu. Select "COPY" from the popup menu
and press the SET key.
Notes
- Do not disconnect the power while the IV-C35M is copying.
- Once data has been corrupted it will be necessary to start after initializing the setting, all over
again. Unless this is done it will not be possible to restart the machine.
- The reference images used for the gray scale search function are not copied with the
operation above. Make sure reset them.
Setting the Conditions for Each Object Type
The target of the copy
The measurement conditions of the target
object type. (The data is used to simplify
setting the target object's parameters)
SELECT OBJECT TYPE COND
OBJECT TYPE COND
TYPE00
OPS-MENU
SAVE
COPY
PASTE
DEL
SPECIFY NUMBER
TITLE
SET=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
3-51
3
COLOR F C1 DRK