Setting Operation - Sharp IV-C35M User Manual

Positional Deviation Measurement

4-2 Setting operation

Setting the measurement conditions
1. Select "MAIN COND" -> "OBJECT TYPE COND" -> "TYPE00" ->
"MEA CND (CAMERA1) " -> "MEAS0," in that order.
.
4
2. "MEASUREMENT 0" is special for positional deviation
measurement. Therefore, "
be set to "COLOR FILTER."
3. Select "
sub-menu "COLOR FILTER" screen appears. Select
" FILTER TYPE" and press the SET key. Select a color
you want to filter from the popup menu.
For detail, see page 3-5.
4. Return to the "MEASUREMENT 0" screen and select
"POSI-DEVIATION" from the popup menu on the
" MEAS SELECTION" line.
5. Press the ESC key to return to the "SELECT OBJECT
TYPE COND" screen. Select "MEAS CND" that is a sub-
menu of "MEAS0(POSI-DEVIATION F)" and press the
SET key to enter the "MEAS CND" setting screen.
Note: "POSI-DEVIATION" (positional deviation) measurement can be specified in the "MEAS0"
(measurement 0) and "MEAS1" (measurement 1) to "MEAS4" (measurement 4) functions. If
you choose "MEAS(NEW)," the smallest available measurement number will be chosen
automatically ("MEAS1" to "MEAS4").
COLOR FILTER SET" shall
COLOR FILTER SET" and press the SET key, a
MEASUREMENT1 SCREEN COND SAVE
1COLOR MODE
2COLOR FILTER SET
3MEAS SELECTION
COLOR FILTER
1FILTER TYPE
MEASUREMENT 0 SCREEN COND SAVE
1COLOR MODE
2COLOR FILTER SET
3MEAS SELECTION
SELECT OBJECT TYPE COND
OBJECT TYPE COND
TYPE00
.
4-2
SELECT OBJECT TYPE COND
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS0
POSI-CORRECT
MEAS(NEW)
+ +
MEA-CND(CAMERA2)
FINAL NUM. CALC
FINAL OUTPUT COND
OBJ-TYPE I/0
OBJ-TYPE SYS.
TYPE(NEW)
COLOR FILTER
(TO NEXT SUB-MENU)
NO
SCREEN COND SAVE
RED
BLUE
GREEN
BLUE
BRIGHT LEV
ANY
COLOR FILTER
(TO NEXT SUB-MENU)
NO
POSI-DEVIATION POSI-DEVIATION
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)