Sharp IV-C35M User Manual page 192

Color Unevenness Inspection
2) On the "MEA-CND" setting screen, press the
TRG/BRT key to move the cursor to the upper
function menu. Select the "COND" item and
then select the "REG COND" item and press
the SET key.
3) On the menu tree, move the cursor to the
"MEAS CND" item, and press the right arrow
key. The sub menu which contains the "REG
COND" item will appear. Move the cursor to
this item and press the SET key.
Set the register conditions
REGISTER NO.
The currently selected register number is
displayed.
If you want to set the measurement conditions
for a different register number, press the SET
key to highlight the register number currently
selected. Then press the up and down arrow
keys to select the register number whose
12
measurement conditions you want to set.
Press the SET key to confirm your selection.
Note: When the "BINARY-IMG-MASK" or the
REFERENCE COLOR
Select a reference color for color extraction
from the already registered colors (when
more than two colors are registered).
MEAS SHAPE
Specify shape of measuring range.
RECTANGLE
CIRCLE
ELLIPSE
"POLYGON" is selected at
" WINDOW" on the "MEA-CND"
screen, the " REGISTER NO." line
will not be displayed and the other item
numbers are decrement by one since
the register number for "BINARY-IMG-
MASK" and "POLYGON" is fixed.
Specify the coordinates for the upper left and lower right corners.
The measurement area will be the area enclosed by this rectangle.
Specify the center and the radius. The measurement area will be the
area enclosed by this circle.
Specify the center and the radius. The measurement area will be the
area enclosed by this ellipse.
SELECT OBJECT TYPE COND
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS(NEW)
MEA-CND(CAMERA2)
FINAL NUM. CALC
FINAL OUTPUT COND
OBJ-TYPE I/O
OBJ-TYPE SYS.
=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
REG CND SCREEN COND SAVE DETAIL
1REGISTER NO.
2REFERENCE COLOR
3MEAS SHAPE
4MEAS AREA
5BINRY NOISE FILT
6NUM.OF FILT PASS
7BOUNDARY PROCESS VALID
8AREA FILTER
=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
12-4
1REGISTER NO.
2REFFERENCE COLOR
3MEAS SHAPE
4MEAS AREA
5BINRY NOISE FILT
6NUM.OF FILT PASS
INSPECT COLOR SHADING
COLOR F C1 BRT
BINRY NOISE FILT
0 (0 3)
BOUNDARY PROCESS
0 (0 7)
AREA FILTER
RECTANGLE
SET (224, 208) (287, 271)
EPD. CONTR.
EPD0 CONT0(0 5)
U. LM245760 L. LM000000 (0 245760)