Sharp IV-C35M User Manual page 238

Fault Inspection
3) On the menu tree, move the cursor to the
"MEAS CND" item, and press the right
arrow key. The sub menu which contains
the "REG COND" item will appear. Move
the cursor to either of these items and
press the SET key.
REGISTER NO.
Enter a number to register the specified
measurement conditions. To change the
number, highlight the number and press the
up and down arrow keys.
MEAS SHAPE
Select the shape of a measurement area.
RECTAN-
GLE
CIRCUM-
FERENCE
ARC
MEAS AREA
Specify measurement area according to the
17 shape specified above.
- When "RECTANGLE" is selected
Specify upper left and lower right corners.
Measures inside a rectangle
between its specified upper left
and lower right corners
Measures along the specified
circumference line.
Measures along the specified
arc from the start to end points.
SELECT OBJECT TYPE COND
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS(NEW)
MEA-CND(CAMERA2)
FINAL NUM. CALC
FINAL OUTPUT COND
=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
REG CND SCREEN COND SAVE
1REGISTER NO.
0 (0 7)
2MEAS SHAPE
RECTANGLE
3MEAS AREA
SET (224, 208)
4CELL SIZE
16 (4
=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
RECTANGLE RESET
1UP. L
(224, 208)
2LO. R
(287, 271)
3MOVE
=MOVE ESC=BACK SEL=CHNG IMG TRG=FUNC
17-4
1REGISTER NO.
2DEFFERENCE COLOR
3MEAS SHAPE
4CELL SIZE
RED F C1 BRT
RECTANGLE
CIRCUMFERENCE
ARC
RETURN RED F C1 BRT
X: 224 Y: 208