Sharp IV-C35M User Manual page 220

[1] Set the register conditions for a gray search
Set a reference image
Move the cursor to "
press the SET key. When the SET item is
highlighted, press the SET key again to bring up
the setting screen.
Set the coordinates for "
The rectangle inside the solid lines is the
reference image.
Register a reference image
After setting the reference image area, store an
image in the controller as a reference image.
Select " REFERENCE IMG" and select "REG"
from the popup menu.
REF-IMG AREA" and
UP.L" and " LO.R."
15-5
Multiple Positional Measurement
REG COND SCREEN COND SAVE DETAIL
1
0(0 3)
2REF-IMG AREA
SET (224.208) (287.271)
3SEARCH AREA
SET (216.200) (295.279)
4MATCH LVL(CONTR)
+05000
5MATCH LVL
+07000
SEL=WINDOW SET ESC=BACK SEL=CHNG IMG TRG=FUNC
RECTANGLE RESET RETURN
1
2
3MOVE
4REFERENCE IMG
SET=MOVE ESC=BACK SEL=CHNG IMG TRG=FUNC
RECTANGLE RESET RETURN
MDL 0
1
2
3MOVE
4REFERENCE IMG
SET=DECISION ESC=BACK SEL=CHNG IMG TRG=FUNC
RED F C1 DRK
Object to measure
Search area
Search coordinate
RED F C1 BRT
X:224 Y:208
RED F C1 BRT
CONTRAST SRCH
REG
DISP
X:224