Sharp IV-C35M User Manual page 169

MEAS SHAPE
Specify shape of measuring range.
Specify the coordinates for the upper left and lower right corners.
RECTANGLE
The measurement area will be the area enclosed by this rectangle.
Specify the center and the radius. The measurement area will be the
CIRCLE
area enclosed by this circle.
Specify the center and the radius. The measurement area will be the
ELLIPSE
area enclosed by this ellipse.
MEAS AREA
Specify a search area.
When "RECTANGLE" is selected
Specify the upper left and lower right corners of the
rectangular search area.
When "CIRCLE" is selected
Specify the center and the radius.
When "ELLIPSE" is selected
Specify the center and the radius.
THRESHOLD
Specify a threshold value.
Move the cursor to " U.LM" and press the SET key. Then move the cursor to "
press the SET key again. The current value will be highlighted for each item. You can increase
or decrease the value by pressing the up and down arrow keys. Press the ESC key to confirm
the value you want.
The values above can be reset to an appropriate level automatically. Move the cursor to the
upper function menu by pressing the TRG/BRT key and select "AUTO-REG." Then press the
SET key to set the levels automatically.
For details, see page 3-21.
Object Counting by Binary Conversion
UP.L
Center
Center
9-5
9
LO.R
Radius
Radius
L.LM" and