Setting Operation - Sharp IV-C35M User Manual

BGA/CSP Inspection

7-2 Setting operation

Setting the measurement conditions
How to enter the measurement conditions setting screen
1. Select "MAIN-COND" -> "OBJECT TYPE
COND" (menu tree) -> "TYPE00" -> "MEA
CND (CAMERA1)" -> "MEAS(NEW)", in that
order. Then press the SET key to bring up
the "MEASUREMENT1" screen.
7
2. On the "MEASUREMENT 1" screen, select
" COLOR MODE" and press the SET key.
From the popup menu, select "COLOR
FILTER."
3. Select "
the SET key, a sub-menu "COLOR FILTER
SET" screen appears. Select "
TYPE" and press the SET key. Select a color
you want to filter from the popup menu.
For detail, see page 3-5.
4. Return to the "MEASUREMENT 1" screen
and select "INSPECT-BGA/CSP" from the
popup menu on the "
line.
5. Press the ESC key to return to the "SELECT OBJECT TYPE COND" screen. Select "MEAS
CND" that is a sub-menu of "MEAS01(INSPECT-BGA/CSP)" and press the SET key to enter the
"MEAS CND" setting screen. Move to the "
"MEASUREMENT1" screen and select "INSPECT-LEAD" from the popup menu.
COLOR FILTER SET" and press
FILTER
MEAS SELECTION"
SELECT OBJECT TYPE COND
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS0
POSI-CORRECT
MEAS(NEW)
+ +
MEA-CND(CAMERA2)
FINAL NUM. CALC
FINAL OUTPUT COND
OBJ-TYPE I/0
OBJ-TYPE SYS.
TYPE(NEW)
=WINDOW SET ESC=BACK SEL=CHNG IMG TRG=POPUP
MEASUREMENT1 SCREEN COND SAVE
1COLOR MODE
COLOR FILTER
2COLOR FILTER SET
(TO NEXT SUB-MENU)
3MEAS SELECTION
NO
COLOR FILTER SET SCREEN COND SAVE
1FILTER TYPE
MEASUREMENT1 SCREEN COND SAVE
1COLOR MODE
COLOR FILTER
2COLOR FILTER SET
(TO NEXT SUB-MENU)
3MEAS SELECTION
INSPECT-BGA/CSP
MEAS SELECTION" line on the
7-2
COLOR F C1 BRT
1COLOR MODE
2COLOR FILTER SET
3MEAS SELECTION
RED F C1 BRT
COLOR FILTER
EXTRACT COLOR
RED F C1 BRT
RED
RED
GREEN
BLUE
BRIGHT LEV
ANY
F C1 BRT
NO
POSI-DEVATION
CHK-DEG-MATCH
INSPECT-LEAD
INSPECT-BGA/CSP
MEAS-BIN-AREA
CNT-BIN-OBJ
LABEL-BIN-OBJ
POINT-MEAS
MULTI-POSI
MULTI MATCHES
INSPECT NG