Setting Operation - Sharp IV-C35M User Manual

Color Unevenness Inspection

12-2 Setting operation

Setting the measurement conditions
1. On the menu tree, select "TYPE00" -> "MEA-
COND(CAMERA1)" and "MEAS(NEW)," in that
order.
2. On the "MEASUREMENT 1" screen, select
" COLOR MODE" and press the SET key.
From the popup menu, select "EXTRACT
COLOR."
3. Select "
the SET key to show the "SET EXTRACT
COLOR" screen. Specify a color for color
extraction on this screen.
For detail about the color extraction, see
page 3-10.
12
4. Return to the "MEASUREMENT 1" screen and
select "INSPECT COLOR SHADING" on the
" MEAS SELECTION" line.
5. Return to the menu tree and then enter "MEA-
CND" menu from the "MEAS01(INSPECT
COLOR SHADING P)" item.
Note: "P" means color extraction mode.
COLOR EXTRACT SET" and press
SELECT OBJECT TYPE COND
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS0
POSI-CORRECT
MEAS(NEW)
+ +
MEA-CND(CAMERA2)
FINAL NUM. CALC
FINAL OUTPUT COND
OBJ-TYPE I/0
OBJ-TYPE SYS.
TYPE(NEW)
MEASUREMENT1 SCREEN COND SAVE
1COLOR MODE
2COLOR FILTER SET
3MEAS SELECTION
MEASUREMENT1 SCREEN COND SAVE
1COLOR MODE
2COLOR EXTRACT SET
3MEAS SELECTION
MEASUREMENT1 SCREEN COND SAVE
1COLOR MODE
2COLOR EXTRACT SET
3MEAS SELECTION
SELECT OBJECT TYPE COND
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS(NEW)
MEA-CND(CAMERA2)
FINAL NUM. CALC
FINAL OUTPUT COND
OBJ-TYPE I/O
OBJ-TYPE SYS.
TYPE(NEW)
=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
12-2
COLOR F C1 BRT
1COLOR MODE
2COLOR FILTER SET
3MEAS SELECTION
COLOR F C1 BRT
COLOR FILTER
EXTRACT COLOR
EXTRACT COLOR
(TO NEXT SUB-MENU)
NO
COLOR F C1 BRT
EXTRACT COLOR
(TO NEXT SUB-MENU)
NO
COLOR F C1 BRT
EXTRACT COLOR
(TO NEXT SUB-MENU)
INSPECT COLOR SHADING
NO
MEAS-BIN-AREA
CNT-BIN-OBJ
LABEL-BIN-OBJ
COLOR EVALUATION
INSPECT COLOR SHADING
MEAS-COLOR-POSI
1COLOR MODE
2COLOR EXTRACT SET
3MEAS SELECTION
INSPECT COLOR SHADING P