Editing Operation Screen - Sharp IV-C35M User Manual

2-4 Editing Operation screen

In this controller (IV-C35M), the operation screen display can be changed. You can move, enlarge,
reduce, or hide any block of text.
(1) Move the cursor to "MAIN-MENU" on the operation screen and press the SET key.
(2) Move the cursor to "EDIT MAIN OPS MENU"
and press the SET key.
(3) Now the operation screen will appear. Select a
block of text you want to edit using the up, down,
left, and right arrow keys, and press the SET
key. A pop up menu will appear and you can
select from move, enlarge, reduce, and hide. (In
this example, the block of text "OK" is selected.)
- MOVE
Select "MOVE" using the SET key. Now the
highlighted block of text can be moved using the
up, down, left, and right arrow keys. When the
text is in the desired new position, press the SET
key again.
Note: If you do not press the SET key lastly, the
movement is not executed.
- MAGNIFICATION/REDUCTION
Move the cursor to the "MAGNIFCATION" or
"REDUCTION" line and press the SET key. The
highlighted block of text can be enlarged or
reduced. (Selectable sizes are two: enlarge <-> standard, reduced <-> standard.)
- NON-DISP
Move the cursor to the "NON-DISP" line and press the SET key. The highlighted block of text will be
deleted. Select it again, the menu is the popup window changed to "DISP." Select this line to
display the deleted item again.
Setting the Operating and System Conditions
MAIN MENU
IVC35M
SYS-CND
OBJECT TYPE COND
SET WIZARD
EDIT MAIN OPS MENU
OPTION
ENVIRONMENT SETTING
MEMORY CARD
=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
OPS-MAIN SCREEN OBJECT SAVE RESET
TYPE00
OK
MEAS XXXXms 2001-10-14 10:38
MEAS1 MEAS-BIN-AREA
MOVE
MAGNIFCATION
REDUCTION
MEAS PROGRAM
NON-DISP
MEAS RESULT
X0 7 Y0 7 READY
2-19
2
COLOR F C1 BRT
COLOR F C1 BRT
F C1 DRK
LOCK FULL V
C1=002.2 OK
C2=100.0 OK
NG-IMG 00(00)