Sharp IV-C35M User Manual page 167

Setting the measurement conditions
WINDOW
Select a window type. On the popup menu,
move the cursor to "NORMAL," "BINARY-
IMG-MASK," or "POLYGON," and press the
SET key to select the item.
NORMAL Normal window
Select this item if the
captured image is
other than a
rectangle, circle, or
BINARY-IMG- ellipse. This function
MASK masks the captured
image using a stored
binary image.
- For details, see
pages 3-37 to 41.
You can manually
create any freeform
POLYGON
polygon for the
measurement area.
REGISTER NO.
Select register number to measure. Number of selectable registers varies with window shape
selected.
NORMAL
BINARY-IMG-MASK 0 only
POLYGON
To save the measurement conditions using a different register number, press the SET key and
highlight the number. Change this number by pressing the up and down arrow keys.
REGISTER EXIST
Select whether to register or not.
REGISTER NO. ( BIN AREA COND)
Register setting conditions are shown for each register number. Circles mean that "REGISTER
EXIST" has set to "YES."
Æ Setting (display) of binary area conditions
REGISTER NO.
4BIN AREA COND
MEA-CND
1
2REGISTER NO.
3REGISTER EXIS
0BIN AREA COND
0 to 3
0 only
When item "3REGISTER EXIST" is
set to "YES," a circle is displayed.
No setting
9-3
Object Counting by Binary Conversion
SCREEN COND SAVE
NORMAL
NO
0(0 3)
YES YES
REGISTER NO.
=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
RED F C1 BRT
NORMAL
BINARY-IMG-MASK
POLYGON
9