Sharp IV-C35M User Manual page 185

Color Evaluation
How to set the register conditions
How to enter the REG-COND setting screen
There are three methods for getting to the REG-COND setting screen.
1) On the "MEA-CND" setting screen, move the
cursor to the "
press the SET key. The cursor will move into
the table. Move the cursor to the " " column
and press the SET key.
Note: If you press the SET key in the "X"
2) On the "MEA-CND" setting screen, press the
TRG/BRT key to move the cursor to the upper
function menu. Select the "COND" item and
then select the "REG COND" item and press
the SET key.
3) On the menu tree, move the cursor to the
11
"MEAS CND" item, and press the right arrow
key. The sub menu which contains the "REG
COND" item will appear. Move the cursor to
this item and press the SET key.
Set the register conditions
REFERENCE COLOR
Select a reference color for color extraction
from the already registered colors (when
more than two colors are registered).
BIN AREA COND" and
column, the setting will be invalid.
MEA-CND SCREEN COND SAVE
1WINDOW
NORMAL
2REGISTER NO.
00 (0 7)
3REGISTER EXIST
NO
REGISTER NO.
00 01
4BIN AREA COND
EXTRACT COLOR
=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
SELECT OBJECT TYPE COND
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS(NEW)
MEA-CND(CAMERA2)
FINAL NUM. CALC
FINAL OUTPUT COND
OBJ-TYPE I/O
OBJ-TYPE SYS.
=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
REG CND SCREEN COND SAVE DETAIL
1REFERENCE COLOR
2MEAS SHAPE
4MEAS AREA
11-4
COLOR F C1 BRT
REG COND
EVALUATION
NUM-CALC
OUT
02 03 04 05 06 07 08 09 10 11 12 13 14 15
1REGISTER NO.
2DEFFERENCE COLOR
3MEAS SHAPE
4MEAS AREA
COLOR F C1 BRT
0 (0 7)
RECTANGLE
SET (224, 208)