Sharp IV-C35M User Manual page 62

FILE TYPE
Select file type to save.
EXEC
After completing entry, select "
A screen shown below will appear and the controller will start saving data to the memory card.
SAVING...
When this screen disappears, saving is complete.
When "READ" or "SAVE AS" is selected
SELECT FILE (TO NEXT SUB-MENU)
Select " SELECT FILE (TO NEXT SUB-
MENU)" using the up and down arrow keys, and
press the SET key to go to a sub menu.
On the "FILE LIST" screen, file names currently
stored in the memory card are displayed. Select
a file to read or overwrite, and press the SET
key.
The selected file name will be displayed under
the "FILE TYPE" line.
EXEC
Select " EXEC" and press the SET key.
A screen shown below will appear.
UNDER ACCESS...
Note: When "SAVE AS" is selected, "UNDER ACCESS..." will appear on the screen.
Setting the Operating and System Conditions
MEMORY CARD
1TRANSMISSION METHOD
2INPUT FILE NAME
3FILE TYPE
FILE NAME
4EXEC
EXEC" and press the SET key.
MEMORY CARD
1TRANSMISSION METHOD
2SELECT FILE
FILE TYPE
FILE NAME
3EXEC
FILE LIST
PAGE NO.
1PAGE CHNG
FILE NAME
SMPL1
MEMORY CARD
1TRANSMISSION METHOD
2SELECT FILE
FILE TYPE
FILE NAME
3EXEC
MEMORY CARD
1TRANSMISSION METHOD
2SELECT FILE
FILE TYPE
FILE NAME
3EXEC
2-23
SCREEN SAVE
NEW SAVE
(TO NEXT SUB-MENU)
PARAM
(SET KEY)
SCREEN SAVE
READ
(TO NEXT SUB-MENU)
PARAM
AAA
(SET KEY)
SCREEN SAVE
TYPE SIZE RENEWAL DATE MODEL COMMENT
PARAM 210 0115 Sample1
SCREEN SAVE
READ
(TO NEXT SUB-MENU)
PARAM
AAA
(SET KEY)
SCREEN SAVE
READ
(TO NEXT SUB-MENU)
PARAM
AAA
(SET KEY)
COLOR F C1 BRT
2
PARAM
NG-IMG
COLOR F C1 BRT
COLOR F C1 BRT
COLOR F C1 BRT
COLOR F C1 BRT