Sharp IV-C35M User Manual page 221

Multiple Positional Measurement
REFERENCE IMG
Move the cursor to the function menu on the
"REG COND" screen by pressing the TRG/BRT
key. Move the cursor to "DETAIL." Press the
SET key on the "REFERENCE IMG" line in the
popup menu. The white square on the left will
change to a black square. Then, the
" REFERENCE IMG" item will appear on the
screen.
You can use the same procedures to show
"DETECT CRD" (detection coordinates) and
"CONTR.PIXL" (contraction pixels) on the
screen.
On the " REFERENCE IMG" line, select a
reference image from the reference images
already registered.
Ex : 015 (000 to 026)
Select reference image No. 15 from the
26 registered reference images (000 to
026).
SEARCH ARE
Specify the search area (inside the dotted lines)
on the " SEARCH AREA (MDL0)" line, using
the same procedures used for setting the
reference image area.
Object to measure
DTECT COORD (detection coordinates)
Select whether to use the detection coordinates
as the center of the reference area or to allow
the point to be set freely.
CONTR.PIXEL (contraction pixels)
1: Search the image in units of 2 pixels.
2: Search the image in units of 4 pixels.
3: Search the image in units of 8 pixels.
Search area
15-6
REG COND SCREEN COND SAVE DETAIL
1
0(0 3)
2REFERENCE IMG
015(000~026)
3REF-IMG AREA
SET (224.208) (287.271)
4SEARCH AREA
SET (216.200) (295.279)
5DIRECT COORD
CENTER (234.219)
6CONTR.PIXEL
3
7MATCH LVL(CONTR)
+05000
8MATCH LVL
+07000
SEL=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
REG COND SCREEN COND SAVE DETAIL
1
0(0 3)
2REFERENCE IMG
RECTANGLE
3REF-IMG AREA
SET (224.208) (287.271)
4SEARCH AREA
SET (216.200) (295.279)
Object to measure
SEL=WINDOW SET ESC=BACK SEL=CHNG IMG TRG=FUNC
REG COND SCREEN COND SAVE DETAIL
1
0(0 3)
2REFERENCE IMG
015(000~026)
3REF-IMG AREA
SET (224.208) (287.271)
4SEARCH AREA
SET (216.200) (295.279)
5DTECT COORD
CENTER (234.219)
6CONTR.PIXEL
3
7MATCH LVL(CONTR)
+05000
8MATCH LVL
+07000
SEL=WINDOW SET ESC=BACK SEL=CHNG IMG TRG=FUNC
COLOR F C1 BRT
*
DETECT CRD
CONTR.PIXL
Make to on the
popup menu, the
respective item will be
added to the "REG
COND" menu.
BLUE F C1 BRT
Search area
RED F C1 BRT
CENTER
SET