Sharp IV-C35M User Manual page 270

PC Function
(2) How to specify the input conditions for ladder circuit diagrams
1. While "CHANGE INPUT" is selected, each
press of the SET key will change the display in
the left most row. The display will cycle
through the following choices: "INPUT00 to
INPUT07," "INPUT08 to INPUT15," and
"INPUT16 to INPUT19." When the input group
you want is displayed, press the down arrow
key to move the cursor to the ladder circuit
display section.
2. Move the cursor to a line number (INPUTxx)
and a row using the up/down/left/right arrow
keys, and press the SET key. Select a type to
input from the popup menu.
The input types for each measurement
program are shown on pages 20-6 to 20-7.
Note: "00M0" means the following:
00M0
3. After selecting an input type, press the SET
key and move the cursor to a logic line.
20
- MATCH M0 (0~1)
- CRD-X0 (0~1)
- CRD-Y0 (0~1)
- DEV-x0 (0~1)
- DEV-y0 (0~1)
- ANGL-B0 (0~1)
- NUM-CAL[NC]00 (0~15)
- AUX.RLY-C000 (0~127)
- 0 to 3: BGA/CSP inspection, object counting by binary conversion, object
identification by binary conversion, multiple position measurement,
multiple degree of match inspection, color unevenness inspection.
- 0 to 7: Positional deviation measurement, color evaluation, color
positional measurement, fault inspection.
- 0 to 15: Degree of match inspection, lead inspection, area measurement
by binary conversion, distance and angle measurement
- 0 to 127: Point measurement (average)
- 0 to 255: Point measurement (binary conversion)
20-4
OUTPUT COND SCREEN SAVE
INPUT00-07
Column No. 0 to 7
CHANGE INPUT
INPUT00
LOGIC
INPUT01
LOGIC
MATCH M
INPUT02
Row No.
CRD-X
LOGIC
INPUT03
CRD-Y
LOGIC
DEV-x
INPUT04
DEV-y
LOGIC
ANGL-B
INPUT05
NUM-CAL[NC]
LOGIC
AUX.RLY-C
INPUT06
LOGIC
INPUT07
This display varies with each
LOGIC
measurement program.
- Page 20-9 to 20-11.
SET=SELECT TYPE SEC=BACK SEL=CHNG IMG TRG=FUNC
OUTPUT COND SCREEN SAVE
INPUT00-07
CHANGE INPUT
INPUT00
LOGIC
INPUT01
LOGIC
INPUT02
LOGIC
INPUT03
LOGIC
INPUT04
LOGIC
INPUT05
DEL
LOGIC
INPUT06
LOGIC
INPUT07
LOGIC
SET=SELECT LOGIC SYMBOL SEC=BACK SEL=CHNG IMG TRG=FUNC
RED F C1 BRT
OUT
Ladder circuit
display area
RED F C1 BRT
OUT