Setting Operation - Sharp IV-C35M User Manual

Degree of Match Inspection

5-2 Setting operation

Setting the measurement conditions
How to enter the measurement conditions setting screen
1. Select "MAIN-COND" -> "OBJECT TYPE
COND" (menu tree)-> "TYPE00" ->"MEA-CND
(CAMERA1)" -> "MEAS(NEW)," in that order.
Then press the SET key to bring up the
"MEAS1"
5
2. On the "MEASUREMENT 1" screen, select
" COLOR MODE" and press the SET key.
From the popup menu, select "COLOR FILTER."
3. Select "
SET key, a sub-menu "COLOR FILTER SET"
screen appears. Select "
press the SET key. Select a color you want to
filter from the pop-up menu.
For detail, see page 3-5.
4. Return to the "MEASUREMENT 1" screen and
select "CHK-DEG-MATCH" from the popup
menu on the "
5. Press the ESC key to return to the "SELECT OBJECT TYPE COND" screen. Select "MEAS CND"
that is a sub-menu of "MEAS01(CHK-DEG-MATCH)" and press the SET key to enter the "MEAS
CND" setting screen.
COLOR FILTER SET" and press the
FILTER TYPE" and
MEAS SELECTION" line.
SELECT OBJECT TYPE COND
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS0
POSI-CORRECT
MEAS(NEW)
MEA-CND(CAMERA2)
FINAL NUM. CALC
FINAL OUTPUT COND
OBJ-TYPE I/O
OBJ-TYPE SYS.
TYPE(NEW)
=NEW REGISTRATION ESC=BACK SEL=CHNG IMG TRG=POPUP
MEASUREMENT1 SCREEN COND SAVE
1COLOR MODE
COLOR FILTER
2COLOR FILTER SET
(TO NEXT SUB-MENU)
3MEAS SELECTION
NO
COLOR FILTER SET SCREEN COND SAVE
1FILTER TYPE
MEASUREMENT1 SCREEN COND SAVE
1COLOR MODE
COLOR FILTER
2COLOR FILTER SET
(TO NEXT SUB-MENU)
3MEAS SELECTION
CHK-DEG-MATCH
5-2
1
2
3
RED F C1 BRT
COLOR FILTER
EXTRACT COLOR
RED F C1 BRT
RED
RED
GREEN
BLUE
BRIGHT LEV
ANY
RED F C1 BRT
NO
POSI-DEIVATION
CHK-DEG-MATCH
INSPECT-LEAD
INSPECT-BAG/CSP
MEAS-BIN-AREA
CNT-BIN-OBJ
LABEL-BIN-OBJ
POINT-MEAS
MULTI-POSI
MULTI MATCHES
INSPECT NG