Sharp IV-C35M User Manual page 281

Kind of Data
output memory
signal No.
External
Y0 to Y7
output
Y8 to Y15
instructions
Timer
TM0 to TM7
instructions
Counter
CN0 to CN7
instructions
Deletion
- See page 20-8 for details about the auxiliary relays C000 to C127.
Output to the parallel I/F, general purpose serial I/F and computer link.
Output to the general purpose serial I/F or computer link
A timer terminal will be turned ON for a set amount of time (set value
000 to 999, unit 10 ms) after the timer instruction is input.
(Decrementing type)
When the timer instruction input is turned OFF, the timer terminal will
be turned OFF.
[Ex.]
C001
TM0
Timer terminal
C001
2.5 sec.
TM0
[Y00]
While the counter reset relay is OFF, if a counter instruction input is
cycled from OFF to ON, the number of times you set (set value 000
to 999), the counter terminal will be turned ON. (Decrementing type)
When the counter reset relay is turned ON, the counter terminal is
turned OFF.
Create a circuit to turn the counter reset relay ON and OFF on the
row following a row that containing a counter instruction.
[Ex.]
C002
X5
CN0
Counter terminal
X5
[C120]
1
C002
CN0
[Y01]
The output relay on the row where the cursor is located will be deleted.
20-15
Function
TM0
0250
Y00
2.5 sec.
CN0
0003
C120
Y01
2 3 4 5
PC Function
Timer instruction
Timer set value
(2.5 sec.)
Output instruction
(external output)
Counter instruction
Counter set value
Resetting the CN0
Output instruction
(external output)
20