Operation Main Display - Sharp IV-C35M User Manual

[7] Operation main display

When the operation screen was set to display other
screens (such as the "DISP CHG-EVAL" and "PC-
MNTR" screens), this item should be selected to
return to the main display from other screens. On the
"TYPE RUN COND" screen, select "
DISP" and then "YES" on the popup menu. That will
return you to the main operation screen.
Note: When other screens are set to "YES" (such as
the " DISP CHG-EVAL" and "
screens), make sure to select "YES" from the
OPS MAIN DISP.
Press the TRG/BRT key to move the cursor to the
upper function menu. Select "SCREEN" and press
the SET key. Then select "OPS-MENU."
Select "SCREEN-CHG" on the lower menu on the
operation screen and press the SET key. "OPS-
MAIN" will be displayed in the lower right corner of
the screen. While the "OPS-MAIN" line is highlighted,
press the SET key. The main display will then change
back to the operation screen from the other screens
(e.g. the JDG-COND-CHG and PC-MNTR screens).
Setting the Operating and System Conditions
TYPE RUN COND SCREEN SAVE
1MONITOR OUTPUT
2CAPTURE IMG
3MESSAGE DISPLAY
4PATTERN DISPLAY
OPS MAIN
5SHOW BINARY IMG
6SHOW
FIX IMG
7OPS MAIN DISP
8DISP CHG-EVAL
9PC-MNTR
PC-MNTR" 0THROUGH DISPLAY
qEXTENSION FUNC.
SET=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
TYPE RUN COND SCREEN SAVE
1MONITOR OUTPUT
2CAPTURE IMG
3MESSAGE DISPLAY
4PATTERN DISPLAY
5SHOW BINARY IMG
6SHOW
FIX IMG
7OPS MAIN DISP
8DISP CHG-EVAL
9PC-MNTR
0THROUGH DISPLAY
qEXTENSION FUNC.
(TYPE00) AREA1
MEAS
MEASURE 0 CAM1 POSI-DEVIATION
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
2-9
COLOR F C1 BRT
CAM1
PARTIAL-IMG
YES(NUMERIC)
YES
YES
YES
YES YES
NO NO
NO
NO
NO
COLOR F C1 BRT
CAM1
OPS-MENU
PARTIAL-IMG
MAIN
YES(NUMERIC)
SELECT
YES
RETURN
YES
YES
YES
NO
NO
NO
NO
COLOR F C1 DRK
ms 2001-10-14 10:38
OPS-MAIN
PC-MNTR
PC-MNTR 2
2
V*.**
C1=002.2 OK
C2=100.0 OK