Sharp IV-C35M User Manual page 232

Multiple Degree of Match Inspection
SEARCH AREA
Specify the search area (inside the dotted lines) on the "
procedures used for setting the reference image area.
DTECT CRD (detection coordinates)
Select whether to use the detection
coordinates as the center of the reference
area or to allow the point to be set freely.
CENTER: The center of the rectangular area
SET:
Set degree of match
MATCH LVL (CONTR)
Specify the degree of match used for detection in the contracted images (detects contracted
shapes in images whose value is larger than the specified reference value).
MATCH LVL
Specify a degree of match used for detection in the original images of the contracted images that
were detected in the search at line "
than the specified value).
will automatically be used for the
detection coordinates.
You can specify any position in the
rectangular area to be used for the
detection coordinates.
SEARCH AREA" line, using the same
Object to measure
Search area
REG COND SCREEN COND SAVE DETAIL
1
2REFERENCE IMG
3REF-IMG AREA
4SEARCH AREA
5DTECT CRD
6CONTR.PIXEL
7MATCH LVL(CONTR)
8MATCH LVL
SEL=WINDOW SET ESC=BACK SEL=CHNG IMG TRG=FUNC
MATCH LVL" (detects original images which are larger
16-6
RED F C1 BRT
0(0 3)
015(000~026)
SET (224.208) (287.271)
SET (216.200) (295.279)
CENTER (223.241) CENTER
3
SET
+05000
+07000