Measurement Start Input And Result Output Settings - Sharp IV-C35M User Manual

21-2 Measurement start input and result output settings

The combinations of various settings for item "
item " ( )OUT I/F (PARAL.)" on the "I/O CONDITIONS" screen (page 21-1 to 4) are explained
below.
Measurement
start input interface
- Parallel
- General purpose
serial
- CCD trigger
The time required to change object types is calculated differently according to the type of
measurement start input I/O, as follows:
Measurement start input I/F
Parallel
General-purpose serial
CCD trigger
Object type select switch (object type input)
Controller
IV-C35M
Result output
Parallel (1)
Computer link/parallel
General purpose serial/parallel
General purpose serial/parallel
Start sampling
Parallel
General purpose (General purpose
serial
Auto
General purpose
Included in the measurement execution time
Not included in the measurement execution time
Not included in the measurement execution time
Input terminal (model number)
X1 to X5 (0 to 31: 32 object types)
Setting the Input/Output Conditions
MEAS INP I/F," item "
(2)
(3)
(4)
Object type
change
Result output
(Parallel) Parallel
Computer link/parallel
General purpose serial/parallel
General purpose serial/parallel
serial)
Parallel Parallel
General purpose serial/parallel
serial
Time to change object type
21-5
START CCD SAMPL," and
(5)
(6)
(9)
(7)
(8)
(10)
21