Sharp IV-C35M User Manual page 52

(2) Manual measurement
With this function, you can measure distance between two points, the distance between X
coordinates, or the distance between Y coordinates that were selected manually on the operation
main screen.
Operation procedure
1. Select " EXTENSION FUNC." on the
"TYPE RUN COND" screen using the up
and down arrow keys. Then press the SET
key.
2. Select "MANL-MEAS" on the popup menu
and press the SET key.
3. Move the cursor to the upper function menu
by pressing the TRG/BRT key and select
"SCREEN." Then press the SET key.
Select "OPS-MENU" on the popup menu
and return to the operation screen.
4. Move the cursor to the "MNU-CHG"
(menu change) item on the bottom of
the operation screen and press the
SET key to change the bottom menu
display. Move the cursor to "MANL-
MEAS" (manual measurement) and
press the SET key.
5. The menu items for manual
measurements will appear on the
screen.
6. Select " CURSOR1-COORD" or "
CURSOR2-COORD" and press
the SET key.
7. Move cursor 1 or cursor 2 using the
up/down/left/right keys. (They move
one pixel at a time.)
The distance between the two
points, and between the X
coordinates and Y coordinates
for the two points, will change on
real time basis.
8. After the positions of the points are determined, press the SET key.
9. When the operation is complete, press the ESC key.
The manual measurement menu items will disappear.
Setting the Operating and System Conditions
TYPE RUN COND SCREEN SAVE
1MONITOR OUTPUT
CAM1
2CAPTURE IMG
PARTIAL-IMG
3MESSAGE DISPLAY
YES(NUMERIC)
4PATTERN DISPLAY
YES
5SHOW BINARY IMG
YES
6SHOW
FIX IMG YES
7OPS MAIN DISP
YES
8DISP CHG-EVAL
NO
9PC-MNTR
NO
0THROUGH DISPLAY
NO
qEXTENSION FUNC.
MANL-MEAS
TYPE RUN COND SCREEN SAVE
1MONITOR OUTPUT
CAM1
2CAPTURE IMG
PARTIAL-IMG
3MESSAGE DISPLAY
YES(NUMERIC)
4PATTERN DISPLAY
YES
5SHOW BINARY IMG
YES
6SHOW
FIX IMG YES
7OPS MAIN DISP
YES
8DISP CHG-EVAL
NO
9PC-MNTR
NO
0THROUGH DISPLAY
NO
qEXTENSION FUNC.
NO
(TYPE00)AREA1
MEAS ms 2002-10-14 10:38
MEASURE 0 CAM1 POSI DEVIATION
1
2
MNU-CHG NEXT-NG CHG-C1 CHG-C2 MANL-MEAS SHORTCUT
Crosshair cursor 1
2-13
COLOR F C1 BRT
COLOR F C1 BRT
OPS-MENU
MAIN
SELECT
RETURN
Crosshair cursor 2
2