Sharp IV-C35M User Manual page 74

Setting Measurement Conditions
After the colors are registered, the
"REGISTRATION WAS COMPLETED"
message appears.
REGISTRATION WAS COMPLETED.
([SET] KEY ON)
3
Press the SET key again, the selected area is
converted to binary, and this color is registered
as extraction color number 0.
FINE ADJUSTMENT
On " FINE ADJUSTMENT (TO NEXT SUB-
MENU)" line, press the SET key to enter the
sub-menu screen.
The screen shows "HUE," "CHROMA," (color
saturation) and "BRIGHT LEV" of the registered
extracted color with numeric values and graphs.
Dotted lines on each graph are upper and lower
limits, and the solid line is the center value.
Ex.: Change "
Increase value of the "
hue and the start point of the hue and chroma
(saturation) graph moves. The center value
also changes accordingly.
Select "
change numeric values so that each position
can be shifted.
By moving "
points slide accordingly.
Note: To extract and covert to binary wider
range hue, set start and end points of hue
wider.
START POINT" of hue.
START POINT" of
CENTR" and" END POINT" and
CENTR," both start and end
RECTANGLE RESET
1UP. L
(248,232)
2LO. R
(263,247)
3MOVE
4REG
FINE ADJUSUTMENT SCREEN SAVE
1EXTRACT COLOR NO0 (0 7)
[HUE]
2START POINT
080.0 (0 359)
3CENTR
250.0 (0 359)
4END POINT
060.0 (0 359)
[CHROMA]
5U. LM
130.0 (0 255)
6CENTR
120.0 (0 255)
7L. LM
110.0 (0 255)
[BRIGHT LEVEL]
8U. LM
130.0 (0 255)
9CENTR
120.0 (0 255)
0L. LM
110.0 (0 255)
[COLOR DETECT]
=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
FINE ADJUSUTMENT SCREEN SAVE
1EXTRACT COLOR NO0 (0 7)
[HUE]
2START POINT
080.0
3CENTR
250.0 (0 359)
4END POINT
060.0 (0 359)
[CHROMA]
5U. LM
130.0
6CENTR
120.0 (0 255)
7L. LM
110.0 (0 255)
[BRIGHT LEVEL]
8U. LM
130.0 (0 255)
9CENTR
120.0 (0 255)
0L. LM
110.0 (0 255)
[COLOR DETECT]
=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
3-12
RETURN COLOR F C1 BRT
X:248 Y:232
COLOR F C1 BRT
COLOR F C1 BRT
(0 359)
(0 255)