Pc Monitor Screen - Sharp IV-C35M User Manual

Compact color image sensor camera
Hide thumbs Also See for IV-C35M:
Table of Contents

Advertisement

20-6 PC monitor screen

Move the cursor to "SCREEN-CHG" on the
operation screen and press the SET key. A
popup menu will appear and you can select
"PC-MNTR" or "PC-MNTR 2", and press the
SET key. Then the PC monitor screen will be
displayed.
However, before you can display this screen,
you have to set "YES" on the "
on the "TYPE RUN COND" screen.
See page 2-11.
The ON ( ) or OFF ( ) status of the input
relays (X00 to X07) is displayed.
The ON ( ) or OFF ( ) status of the output
relays (Y00 to Y15) is displayed.
The ON ( ) or OFF ( ) status of the
auxiliary relays (C000 to C127) is
displayed.
The results (AN00 to AN15) of the final
numerical calculations are displayed.
The current timer value is displayed.
The current counter value is displayed.
Menu bar
Menu bar
SEL-OUT
SEL-AUX
SEL-NUM
The other data displayed is the same as on the operation screen.
PC-MNTR"
Change the output relay address (Y00 to Y15) with the up and down keys
(in units of 8 points).
Change the auxiliary relay address (C000 to C127) with the up and down
keys (in units of 8 points).
Change the final numerical calculation address (AN00 to AN15) with the up
and down keys (in units of 8 points).
(TYPE00)
OK
MEAS XXXXms 2001-10-14 10:38
1
2
3
4
NUMERIC CALC
5
AN00 NOT SET
6
AN01 NOT SET
AN02 NOT SET
AN03 NOT SET
AN04 NOT SET
AN05 NOT SET
AN06 NOT SET
AN07 NOT SET
7
MNU-CHG MAIN-COND SEL-OUT SEL-AUX SEL-NUM SCREEN-CHG CHG-TYPE
Change the output
relay address
Description
See page 1-10.
20-19
PC Function
COLOR
F C1 DRK
TMR
CNTR
NOT SET
NOT SET
NOT SET
NOT SET
NOT SET
NOT SET
NOT SET
NOT SET
NOT SET
NOT SET
NOT SET
NOT SET
NOT SET
NOT SET
NOT SET
NOT SET
OPS-MAIN
PC-MNTR 2
Change the final
Change the
auxiliary relay
numerical calculation
address
address
V*.**
20

Advertisement

Table of Contents
loading

Table of Contents