Sharp IV-C35M User Manual page 150

Setting the measurement conditions
WINDOW
Select a window type. On the popup
menu, move the cursor to "NORMAL,"
"BINARY-IMG-MASK," or "POLYGON,"
and press the SET key to select the item.
NORMAL Normal window
Select this item if the captured image is other than a rectangle, circle, or
BINARY-IMG- ellipse. This function masks the captured image using a stored binary
MASK image.
- For details, see pages 3-37 to 41.
POLYGON You can manually create any freeform polygon for the measurement area.
REGISTER NO.
Select register number to measure. Number of selectable registers varies with window
shape selected.
NORMAL
BINARY-IMG-MASK 0 only
POLYGON
REGISTER EXIST
Select whether to register or not.
REGISTER NO. ( BIN AREA COND)
Register setting conditions are shown for each register number. Circles mean that
"REGISTER EXIST" has set to "YES."
Æ Setting (display) of binary area conditions
1
BINARY-IMG-MASK
2REGISTER NO.
0(0 3)
3REGISTER EXIST YES
REGISTER NO.
4BIN AREA COND
MEA-CND
1
2REGISTER NO.
3REGISTER EXIST YES
REGISTER NO.
4BIN AREA COND
=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
0 to 3
0 only
When item 3REGISTER
NO
EXIST. is set to "YES," a
YES
circle is displayed.
No setting
7-3
BGA/CSP Inspection
SCREEN COND SAVE RED F C1 BRT
NORMAL
NORMAL
BINARY-IMG-MASK
0(0 3)
POLYGON
NO
YES
7