Sharp IV-C35M User Manual page 70

Setting Measurement Conditions
3. Press the SEL key to move the cursor to the
"F" (freeze image) that is at upper right of the
screen. Press the up and down arrow keys to
change from "F" to "T" (through image). The
image of Camera 1 changes to through image
and current image through the camera dis-
3
played on the monitor.
Change the image from "T" to "F" using the up
and down arrow keys. By changing the image
from "T" to "F," the IV-C35M stores the image.
4. On the "REG COND" screen, select
" REFIMG ARE" and enter the RECT-
ANGLE setting screen.
5. Determine "
the position and size of the rectangle, select
the "
key. On the popup menu, select the "REG"
and the selected range appears at the lower
right of the screen.
UP.L" and " LO.R" to specify
REFERENCE IMG" and press the SET
RECTANGLE RESET
MDL 0
1UP. L
(224, 208)
2LO. R
(287, 271)
3MOVE
4REFFERENCE IMG
=DECISION ESC=BACK SEL=CHNG IMG TRG=FUNC
REG COND SCREEN COND SAVE DETAIL
1REGISTER NO
0 (0 7)
2MEAS SHAPE (MDL0)
RECTANGLE
3REF IMG ARE
(MDL0) SET
4SEARCH ARE
(MDL0) SET
=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
RECTANGLE RESET
1UP. L
(224, 208)
2LO. R
(287, 271)
3MOVE
4REFFERENCE IMG
=MOVE ESC=BACK SEL=CHNG IMG TRG=FUNC
3-8
RETURN RED F C1 BRT
X:224 Y:208
RED F C1 BRT
(224, 208) (287, 271)
(216, 200) (295, 279)
RETURN RED F C1 BRT
CONTRAST SRCH
REG
DISP
X:224 Y:208