Setting Operation - Sharp IV-C35M User Manual

Multiple Positional Measurement

15-2 Setting operation

Setting the measurement conditions
How to enter the measurement conditions setting screen
1. Select "MAIN-COND" -> "OBJECT TYPE
COND" (menu tree) -> "TYPE00" -> "MEA CND
(CAMERA1)" -> "MEAS(NEW)", in that order.
Then press the SET key to bring up the
"MEASUREMENT1" screen.
2. On the "MEASUREMENT 1" screen, select
" COLOR MODE" and press the SET key.
From the popup menu, select "COLOR FILTER."
3. Select " COLOR FILTER SET" and press the
SET key, a sub-menu "COLOR FILTER SET"
screen appears. Select "
press the SET key. Select a color you want to
filter from the popup menu.
For detail, see page 3-5.
4. Return to the "MEASUREMENT 1" screen and
select "MULTI-POSI" from the popup menu on
the " MEAS SELECTION" line.
5. Press the ESC key to return to the "SELECT OBJECT TYPE COND" screen. Select "MEAS CND"
that is a sub-menu of "MEAS01(MULTI-POSI)" and press the SET key to enter the "MEAS CND"
setting screen.
FILTER TYPE" and
1COLOR MODE
2COLOR FILTER SET
3MEAS SELECTION
15-2
SELECT OBJECT TYPE COND
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS0
POSI-CORRECT
MEAS(NEW)
+ +
MEA-CND(CAMERA2)
FINAL NUM. CALC
FINAL OUTPUT COND
OBJ-TYPE I/0
OBJ-TYPE SYS.
TYPE(NEW)
=WINDOW SET ESC=BACK SEL=CHNG IMG TRG=POPUP
MEASUREMENT1 SCREEN COND SAVE
1COLOR MODE
COLOR FILTER
2COLOR FILTER SET
(TO NEXT SUB-MENU)
3MEAS SELECTION
NO
COLOR FILTER SET SCREEN COND SAVE
1FILTER TYPE
RED
MEASUREMENT1 SCREEN COND SAVE
COLOR FILTER
(TO NEXT SUB-MENU)
MULTI-POSI
COLOR F C1 BRT
1COLOR MODE
2COLOR FILTER SET
3MEAS SELECTION
RED F C1 BRT
COLOR FILTER
EXTRACT COLOR
RED F C1 BRT
RED
GREEN
BLUE
BRIGHT LEV
ANY
RED F C1 BRT
NO
POSI-DEVATION
CHK-DEG-MATCH
INSPECT-LEAD
INSPECT-BGA/CSP
MEAS-BIN-AREA
CNT-BIN-OBJ
LABEL-BIN-OBJ
POINT-MEAS
MULTI-POSI
MULTI MATCHES
INSPECT NG