Detaching And Refitting The Main Drive Unit - Kyocera FS-3040MFP+ Service Manual

(2) Detaching and refitting the main drive unit

Procedure
1. Remove the right cover.
(See page 1-5-3)
2. Remove the controller box.
(See page 1-5-34)
3. Remove two connectors.
4. Remove five screws and then remove
the main drive unit.
5. Check or replace the main drive unit
and refit all the removed parts.
Screw
Connectors
Screw
1-5-45
Screw
Screw
Main drive unit
Screw
Figure 1-5-68
2MF/2MG