Setting The Cassette Paper Type; Selecting The Paper Feed Source - Kyocera FS C8026N Operation Manual

3.10 Paper Handling
7 7 7 7
When the desired paper type is displayed, press the
ENTER key. The paper type is set to the MP tray.
8 8 8 8
To exit the menu selection, press the MENU key.

3.10.4 Setting the Cassette Paper Type

After you assign a paper type to each of the paper cassettes,
the printer will automatically select the correct cassette in
accordance with the paper type you specify on your
computer for printing. The default setting for all paper
cassettes is plain paper.
If you have an optional paper feeder installed on your printer,
you can also use this procedure to specify the paper type of
the paper feeder paper cassette.
For more information about paper types, see
Handling Paper.
1 1 1 1
Press the MENU key.
2 2 2 2
Press the or
Handling > appears.
Paper Handling >
3 3 3 3
Press the key.
4 4 4 4
Press the or
# Type appears. (Where # here refers to the cassette
number.)
>Cassette 1 Type
Plain
When the optional Duplex Unit (DU-640) is
installed, the duplex drawer takes up the space
of topmost cassette. Because of this, cassette
Note
numbering starts from 2.
5 5 5 5
To change paper type, press the ENTER key. A
blinking question mark (?) appears.
>Cassette 1 Type
? Plain
Chapter 2
key repeatedly until Paper
key repeatedly until >Cassette
6 6 6 6
Press the or
type. The message display toggles through the
following paper types:
Plain
Preprinted
Bond
Recycled
Vellum
Letterhead
Color
Prepunched
High quality
Custom 1 (to 8)
7 7 7 7
When the desired paper type is displayed, press the
ENTER key.
8 8 8 8
To exit the menu selection, press the MENU key.

3.10.5 Selecting the Paper Feed Source

You can select the paper source using the operator panel,
from which the printer feeds paper as the default. If an
optional paper feeder(s) is installed, it is also available for the
default paper source.
1 1 1 1
Press the MENU key.
2 2 2 2
Press the or
Handling > appears.
Paper Handling >
3 3 3 3
Press the key.
4 4 4 4
Press the or
Select appears.
>Feed Select
Cassette 1
5 5 5 5
To change the current paper feed source, press the
ENTER key. A blinking question mark (?) appears.
>Feed Select
? Cassette 1
3-50
key to display the desired paper
key repeatedly until Paper
key repeatedly until >Feed