Table of Contents
Advertisement
3.13 Other Modes
6 6 6 6
Press the
or
appears.
>>Staple
Off
7 7 7 7
Press the ENTER key. A blinking question mark (?)
appears.
Staple
>>
? Off
8 8 8 8
Press the
or
9 9 9 9
Press the ENTER key.
10
10
10
10
To exit the menu selection, press the MENU key.
3.13.12 Punch Error Detection Setting
This setting is possible only when the PH-3B Punch Unit is
installed on the optional DF-610/610 finisher unit. This
setting controls whether or not the message Chad box full
appears when the chad box on the punch unit becomes full.
When the chad box becomes full while this setting is On:
•
Message is displayed and printing pauses. Printing
resumes automatically when the chad box is emptied and
replaced back into the punch unit.
When the chad box becomes full while this setting is Off:
•
Message is displayed, but printing continues without
punching.
1 1 1 1
Press the MENU key.
2 2 2 2
Press the
or
appears.
Others
3 3 3 3
Press the
key.
4 4 4 4
Press the
or
Finishing Error > appears.
>Finishing
Error
key repeatedly until >>Staple
key to change Off to On.
key repeatedly until Others >
>
key repeatedly until >
>
5 5 5 5
Press the
key.
6 6 6 6
Press the
or
appears.
>>Punch
Off
7 7 7 7
Press the ENTER key. A blinking question mark (?)
appears.
Punch
>>
? Off
8 8 8 8
Press the
or
9 9 9 9
Press the ENTER key.
10
10
10
10
To exit the menu selection, press the MENU key.
3.13.13 Mixed Color/Monochrome Print
Setting
The printer has four color printing drums and developers
(cyan, magenta, yellow, and black). The workload for each of
these components are even regardless of which color is being
used to print a job. When the printer prints a job which
contains color pages and monochrome pages mixed together,
you can choose to optimize the life of cyan, magenta, and
yellow components or to ensure performance throughput.
You can select from the following options:
Mostly Monochrome The printer switches to deactivate cyan,
Mostly Color
Auto
The default setting is Auto.
1 1 1 1
Press the MENU key.
3-64
key repeatedly until >>Punch
key to change Off to On.
magenta, and yellow developing components
to optimize the life of these components. This
option may reduce throughput performance.
The printer does not switch to deactivate any
developing component while printing
black-only pages. This provides maximum
printing performance.
The printer automatically switches between
Mostly Monochrome and Mostly Color
options by looking-ahead-first manner.
Advertisement
Table of Contents
