Safety Notices On The Product; Safety Notices In The Manual; Preliminary Recommendations - WEG CFW-09 User Manual

1.1 SAFETY NOTICES IN
THE MANUAL
1.2 SAFETY NOTICES
ON THE PRODUCT
1.3 PRELIMINARY
RECOMMENDATIONS
SAFETY NOTICES
This Manual contains all necessary information for the correct installation
and operation of the CFW-09 Variable Frequency Inverter.
The CFW-09 Instruction Manual has been written for qualified personnel
with suitable training or technical qualifications to operate this type of
equipment.
The following Safety Notices will be used in this Manual:
DANGER!
If the recommended Safety Instructions are not strictly observed, it can lead
to serious or fatal injuries of personnel and/or equipment damage.
ATTENTION!
Failure to observe the recommended Safety Procedures can lead to materi-
al damage.
NOTE!
The content of this Manual supplies important information for the correct
understanding of operation and proper performance of the equipment.
The following symbols may be attached to the product, serving as Safety
Notice:
High Voltages.
Components are sensitive to electrostatic discharge. Do not touch
them without following proper grounding procedures.
Mandatory connection to ground protection (PE).
Shield connection to ground.
DANGER!
Only qualified personnel should plan or implement the installation, startup,
operation and maintenance of this equipment. Personnel must review this
entire Manual before attempting to install, operate or troubleshoot the
CFW-09.
These personnel must follow all safety instructions included in this Manual
and/or defined by local regulations.
Failure to comply with these instructions may result in personnel injury and/
or equipment damage.
1
CHAPTER
35