WEG CFW-09 User Manual page 273

CHAPTER 8 - CFW-09 OPTIONS AND ACCESSORIES
274
Figure 8.27 - DBW-01 and DBW-02 positioning
The DBW-01 and DBW-02 can also be installed with a through surface mounting
kit as described in item 8.11. In this case, use the available installation kit,
which contains the respective installation supports. Figure 8.28 shows the
mounting cutouts.
Figure 8.28 - Cutout dimensions in air duct - Dimensions mm (inch)
Table 8.14 shows the weights of the different DBW-01 types.
Fastening Screw
Type
DBW-01 165
DBW-01 240
DBW-01 300
DBW-02 210
DBW-02 300
DBW-02 380
Table 8.14 - Mechanical data of the DBW-01 and DBW-02
Air Flow
Degree of
Weight (Kg)
Protection
14.2
13.8
13.4
M6
14.2
13.8
13.4
IP20