Safety Information; General Information; Contents Of The Package; Safety Warnings - WEG CFW500 Installation And Operation Manual

Ethernet Communication Plug-in Module

1 SAFETY INFORMATION

1.1 SAFETY WARNINGS

NOTE!
Only use the Ethernet communication
„
plug-in module (CF W50 0 - CE TH-IP,
CFW500-CEMB-TCP, CFW500-CEPN-IO)
on WEG inverters of the CFW500 line.
Read the user's manual of the CFW500
„
and the user's manual of the Ethernet
b e f o r e i n s t a l l i n g o r o p e r a t i n g t h i s
accessory.
This guide contains important information
„
for the correct understanding and proper
operation of this module.

1.2 PRELIMINARY RECOMMENDATIONS

ATTENTION!
Always disconnect the general power
„
supply before connecting or disconnecting
the accessories of the frequency inverter
CFW500.
Wait for at least 10 minutes to guarantee
„
complete de-energization of the inverter.

2 GENERAL INFORMATION

This guide contains instructions for the installation,
configuration and operat ion of the Ethernet communication
plug-in module. There are three different modules
according to the specified communication protocol.
CFW500-CETH-IP: EtherNet/IP protocol.
„
CFW500-CEMB-TCP: Modbus TCP protocol.
„
CFW500-CEPN-IO: PROFINET IO protocol.
„

3 CONTENTS OF THE PACKAGE

When receiving the product, check if this package
contains:
Accessory in anti-static packaging.
„
Installation, configuration and operation guide.
„
CFW500 | 5